Constant activity of glutamine synthetase after morphine administration versus proteomic results

Glutamine synthetase is a key enzyme which has a regulatory role in the brain glutamate pool. According to previously published proteomic analysis, it was shown that the expression level of this enzyme is affected by morphine administration. In our study, we examined the activity of glutamine synthetase in various structures of rat brain (cortex, striatum, hippocampus and spinal cord) that are biochemically and functionally involved in drug addiction and antinociception caused by morphine. We were not able to observe any significant changes in the enzyme activity between morphine-treated and control samples despite previously reported changes in the expression levels of this enzyme. These findings stressed the fact that changes observed in the expression of particular proteins during proteomic studies may not be correlated with its activity.     

Synthesis of water-soluble cationic cellulose derivatives with tertiary amino groups

Water-soluble cellulose derivatives with tertiary amino groups up to substitution degree 0.8 (4.2% of coupled nitrogen) were prepared in a controlled manner by the interaction of cellulose acetate with N,N-diethylepoxypropylamine. It was shown that two reactions take place simultaneously, i.e., hydrolysis of acetyl groups and aminoalkylation of free hydroxyl groups of cellulose. The amino groups coupled to the cellulose are of middle basicity with pK _α ~9.5. Solubility of the products was found to be determined by the chemical composition of the cellulose derivative.     

On indexed families of multifunctions generated by families of functions

We present some necessary and some sufficient conditions for a family of multifunctions generated by two families of real functions to be a collapsing, an expanding family or an iteration semigroup. Some properties of set-valued iteration groups generated by commuting homeomorphisms not embeddable in an iteration group are given.     

Planarity of heteroaryldithiocarbazic acid derivatives showing tuberculostatic activity. II. Crystal structures of 3‐[amino(pyrazin‐2‐yl)methylidene]‐2‐methylcarbazic acid esters

Four compounds showing moderate antituberculostatic activity have been studied to test the hypothesis that the planarity of the 2‐[amino(pyrazin‐2‐yl)methylidene]dithiocarbazate fragment is crucial for activity. N′‐Anilinopyrazine‐2‐carboximidamide, C₁₁H₁₁N₅, D1, and diethyl 2,2′‐[({[amino(pyrazin‐2‐yl)methylidene]hydrazinylidene}methylidene)bis(sulfanediyl)]diacetate, C₁₄H₁₉N₅O₄S₂, B1, maintain planarity due to conjugation and attractive intramolecular hydrogen‐bond contacts, while methyl 3‐[amino(pyrazin‐2‐yl)methylidene]‐2‐methyldithiocarbazate, C₈H₁₁N₅S₂, C1, and benzyl 3‐[amino(pyrazin‐2‐yl)methylidene]‐2‐methyldithiocarbazate, C₁₄H₁₅N₅S₂, C2, are not planar, due to methylation at one of the N atoms of the central N—N bond. The resulting twists of the two molecular halves (parts) of C1 and C2 are indicated by torsion angles of 116.5 (2) and −135.9 (2)°, respectively, compared with values of about 180° in the crystal structures of nonsubstituted compounds. As the methylated derivatives show similar activity against Mycobacterium tuberculosis to that of the nonsubstituted derivatives, maintaining planarity does not seem to be a prerequisite for activity.     

RP-LC for Determination of Plastochromanol,Tocotrienols and Tocopherols in Plant Oils

An isocratic high performance liquid chromatographic method, with the application of C₁₈ and C₃₀ reverse-phase column and fluorescence detection, is described for the analysis of plastochromanol, tocotrienols and tocopherols in plant seed oils. The solvent systems have been optimized to obtain high resolution for all tocochromanols and relatively short analysis time. The use of reverse-phase columns for plastochromanol analysis, previously not reported, enables very sensitive and selective detection of plastochromanol which under the described separation conditions did not interfere with tocochromanols or any other compounds. The sample extraction method is fast, simple and highly efficient. The obtained results show that plastochromanol was present in most of the investigated seed oils. Its level was the highest in flax (17–30 mg/100 g oil), rape (8.5–9), camelina (4.3), peanut (1.95), corn (1.69) and grape (1.31) seed oils. Its level in the other investigated oils was below 1 mg/100 g oil, and only in sesame and coconut oils it was not detected. Tocotrienols were found in most of the oils but their content was usually very low (<<1 mg/100 g oil) with the exception of grape, milk thistle and corn oils where it reached >1 mg/100 g oil. Tocopherol content and isomer composition was within the earlier reported literature values for the investigated oils.

     

Striking Differences in Properties of Geometric Isomers of [Ir(tpy)(ppy)H]+: Experimental and Computational Studies of their Hydricities,Interaction with CO2, and Photochemistry

We prepared two geometric isomers of [Ir(tpy)(ppy)H]⁺, previously proposed as a key intermediate in the photochemical reduction of CO₂ to CO, and characterized their notably different ground‐ and excited‐state interactions with CO₂ and their hydricities using experimental and computational methods. Only one isomer, C‐trans‐[Ir(tpy)(ppy)H]⁺, reacts with CO₂ to generate the formato complex in the ground state, consistent with its calculated hydricity. Under photocatalytic conditions in CH₃CN/TEOA, a common reactive C‐trans‐[Ir(tpy)(ppy)]⁰ species, irrespective of the starting isomer or monodentate ligand (such as hydride or Cl), reacts with CO₂ and produces CO with the same catalytic efficiency.     

Surface properties of chitosan composites with poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) and montmorillonite

Surface properties of composites containing chitosan (Ch) with poly(N-vinylpyrrolidone) (PVP) and montmorillonite (MMT) additives were investigated by contact angle measurements, thermogravimetric analysis (TGA), atomic force microscopy (AFM) and tensile tests. Composites were obtained by drop casting suspensions of montmorillonite (1 wt % relative to chitosan) and polymer (1 wt %) in 0.1 mol/dm³ acetic acid. Contact angle measurements for diiodomethane (D) and glycerol (G) on the surfaces of the chitosan films, PVP and their composite films were made; surface free energies were also calculated. It was found that the PVP/MMT or Ch/PVP/MMT blend surface is enriched with a high surface energy component, i.e., polyvinylpyrrolidone. The roughness of chitosan composites increases after the addition of montmorillonite; this may indicate an increase in the heterogeneity of this composition in comparison to other compositions. The TGA thermograms and mass loss percentages at different decomposition temperatures showed that the thermal stability of the binary composite slightly increases upon the addition of polyvinylpyrrolidone. The mechanical properties such as tensile strength and Young modulus depend on the composition and varied non-uniformly.     

Non-gaussian diffusion modeling in composite porous media by homogenization: Tail effect

In the paper anomalous diffusion appearing in a porous medium composed of two porous components of considerably different diffusion characteristics is examined. The differences in diffusivities are supposed to result either from two medium types being present or from variations in pore size (double porosity media). The long-tail effect is predicted using the homogenization approach based on the application of multiple scale asymptotic developments. It is shown that, if the ratio of effective diffusion coefficients of two porous media is of the order of magnitude smaller or equal O( ²), where is a homogenization parameter, then the macroscopic behaviour of the composite may be affected by the presence of tail-effect. The results of the theoretical analysis were applied to a problem of diffusion in a bilaminate composite. Analytical calculations were performed to show the presence of the long-tail effect in two particular cases.Notations c _i the concentration of chemical species in water within the medium i - D _i the effective diffusion coefficient for the medium i - D _ij ^eff the macroscopic (or effective) diffusion tensor in the composite - ERV the elementary representative volume - h the thickness of the period - l a chracteristic length of the ERV or the periodic cell - L a characteristic macroscopic length - n the volumetric fraction of the material 2 - 1–n the volumetric fraction of the material 1 - N the unit vector normal to - t the time variable - x the macroscopic (or slow) space variable - y the microscopic (or fast) space variable - c _1c ,C _2c ,D _1c ,D _2c the characteristic quantities - T,T _1L ,T _2L ,T _1l ,T _2l the characteristic times - c ₁ ^* ,c ₂ ^* ,D ₁ ^* ,D ₂ ^* ,t ^* the non-dimensional variables - the homogenization parameter - ₁ the domain occupied by the material 1 - ₂ the domain occupied by the material 2 - the interface between the domains 1 and 2 - the total volume of the periodic cell - /x_i the gradient operator - the gradient operator     

Heavy metals adsorption by novel EDTA-modified chitosan-silica hybrid materials

Ionic liquid based microemulsions were characterized by absorption solvatochromic shifts, (1)H NMR and kinetic measurements in order to investigate the properties of the ionic liquid within the restricted geometry provided by microemulsions and the interactions of the ionic liquid with the interface. Experimental results show a significant difference between the interfaces of normal water and the new ionic liquid microemulsions. Absorption solvatochromic shift experiments and kinetic studies on the aminolysis of 4-nitrophenyl laurate by n-decylamine show that the polarity at the interface of the ionic liquid in oil microemulsions (IL/O) is higher than at the interface of water in oil microemulsions (W/O) despite the fact that the polarity of [bmim][BF(4)(-)] is lower than the polarity of water. (1)H NMR experiments showed that an increase in the ionic liquid content of the microemulsion led to an increase in the interaction between [bmim][BF(4)(-)] and TX-100. The reason for the higher polarity of the microemulsions with the ionic liquid can be explained in terms of the incorporation of higher levels of the ionic liquid at the interface of the microemulsions, as compared to water in the traditional systems.